text.skipToContent text.skipToNavigation
 

Vicoma - Virtual Reality Actually Delivers Lighting Benefits

A lighting plan may look nice on paper or screen, but ultimately what counts is what the lighting does in reality. Virtual reality can help to get a good idea of this in advance. Consultant Vicoma and lighting expert itsme proved it in a project for the Royal Netherlands Navy. "They knew within 7 minutes: ‘That’s how we want it’."


Vicoma is an independent consultancy and engineering firm with five offices, including one in Velsen-Noord (60 employees). Christian Klaver has been working there for two years now as Electrical & Instrumentation team leader. For a lighting project at the Royal Netherlands Navy in Den Helder, he brought in itsme to design the lighting plan. In doing so, he worked mainly with Ruud Adriaansen, team leader of the Lighting Design Center at itsme.

Curious about Breemes' lighting plans?

Fill in the form and we will get back to you!

Incredibly fast

The project involved new lighting for a dry dock. That is a hall where a ship can enter for maintenance, after which the dock is drained. That way, the part that is normally underwater can be blasted to clean it, and sprayed to repaint it. The old lighting was a sight for sore eyes, says Klaver. "There were old gas discharge lamps, the whole hall looked yellow and orange." Adriaansen adds: "In terms of lighting and shadowing it was an absolute disaster. "If you sailed a ship back out after maintenance and a part turned out not to have been sprayed properly after all, you would have a serious problem with planning and costs if you had to go back into the dock. We therefore had to do everything possible to provide the proper lighting." Of course, energy saving also played a part, Klaver continues. "However, that was more of an added bonus. What the Navy mainly wanted was good lighting so that spraying could be done properly."

"Everybody could pitch in"

An additional requirement was that the lighting should be easy to switch, in order to play with light levels flexibly. For example, spraying requires a different light level than assembly work. The maximum light level was exceptionally high and high uniformity was required, Adriaansen explains. "In terms of lighting requirements, this was an extensive project." What was also special was the way those requirements were put on the table, Klaver explains. "We went to Den Helder together with itsme and immediately invited all the users of the dry dock to start laying down the principles properly. This ranged from the company that sprays ships and the department responsible for bringing them in, to the crane operator and the safety department. Everybody was allowed to pitch in on the lighting requirements." Adriaansen describes the situation as unique. "To have all parties pitch in is something we don't often experience." Fortunately, there were no conflicting preferences, reports Klaver. "We were able to work it out miraculously quickly. People had their say and we wrote it down; there were no disagreements."


Everything in 3D

During the first survey, itsme took light measurements in order to compare the existing and the desired situation, Adriaansen explains. "Based on that, I created a design. One of the challenges was mounting luminaires on the ceiling, due to the height of the hall. Moreover, the assembly had to be done quickly, to avoid the dock being out of operation for too long. I then performed calculations as proof of sufficient lighting levels. This time I went the extra mile by working out the entire hall in 3D and putting in all the models of the luminaires in 3D. This resulted in a virtual reality model that ultimately played a pivotal role in the decisions on the lighting plan. We showed some people from the Navy that lighting plan in virtual reality and in less than seven minutes they agreed: ‘That’s how we want it’ I have never experienced a decision being made that fast."

"We also perform the final check, with the Lighting Acceptance Test"

At a number of points, the lighting was still found to be inadequate, Klaver adds. "The lighting plan was immediately adjusted accordingly." A particular challenge was that the luminaires to light the bottom of a ship would be underwater for as long as the dry dock was not drained. Those luminaires therefore had to withstand salt water, the pressure at 12 metres underwater and the force of incoming water as the dock filled up again. "What luminaire could we possibly install down there?" When it came to choosing the brand, the parties therefore took time to decide, recalls Adriaansen. "In the end, we found a supplier that had everything in its package, Norka. With an entire delegation from the Navy, Vicoma and itsme, we visited their factory in Germany to get an impression of the quality of the luminaires.
"Vicoma was then able to write the specifications that would allow the Navy to take it to the market for competitive bidding. This completes the lighting design, which means the work is almost done for itsme, says Adriaansen. "During the installation, a colleague will still check that everything is installed as we designed it. We also do the final check." This is done with the LAT, the Lighting Acceptance Test, explains Klaver. "Part of the specifications is that an LAT must be carried out, in the presence of the company that made the lighting plan, in other words itsme."
   

Excellent

This LAT is the last phase of a very special project. "For me, it was the first lighting project of this size," says Klaver. Adriaansen calls it "Quite a unique situation". "Usually we are at the table with the end user, this time it was a consultant." Both parties are content about the cooperation. "Excellent," says Klaver. "We are in sync and know each other's strengths: itsme has expertise in making a lighting plan, we in writing specifications." Adriaansen agrees: "We understand each other and are able to complete each other’s sentences, which makes communication fast and transparent, resulting in clear agreements." Klaver: "Because we outsourced relatively much to itsme, we as Vicoma had it relatively easy. We leaned very much on the expertise of Ruud and his colleagues. As a spin-off, we have already made an offer for a full package together with itsme for a subsequent lighting project." Adriaansen: "I've been in the lighting business for 26 years now and my Top 5 most challenging projects definitely include this one. We regularly receive international relations and the first thing our director starts talking about is this example."


Check out our other success stories:

  • TESTIMONIAL
    08.11.2024
    Xeltis - Heart for business
    Xeltis develops technology for making artificial vessels and heart valves. When they needed a professional measuring machine for quality control, they knocked on itsme's door for control software and data collection. It worked out really well. “itsme has a lot of in-house expertise, they know everything about the hardware and they can switch quickly with partners. Plus, they're flexible.”
    Read more
  • TESTIMONIAL
    08.11.2024
    Van de Kar - Greater efficiency and depth with bespoke training
    Van de Kar Elektrotechniek has had a relationship with itsme since early 2003 for the supply of materials and Siemens training sessions. This spring was the premiere of in-house customised training. “That is much more efficient. Our guys already have a certain background, so they can skip basic stuff and actually dive deeper into specific parts.”
    Read more
  • TESTIMONIAL
    08.11.2024
    Manders Automation - Challenging each other to do it better and smarter
    The relationship between Manders Automation and itsme is all about flexibility and the drive to do things better and smarter. Take, for example, the 2BIN system for grab stock management and the complete kits for serial machine construction. “We are constantly challenging each other. We also want to take additional steps in digitalization and become more sustainable.”
    Read more
  • TESTIMONIAL
    02.10.2024
    Sissing Noord - Commissioning Frequency
    Sissing Noord in Leek (Groningen) is an expert in the maintenance, renovation and construction of “wet” infrastructure, like movable bridges, pumping stations and locks. For the drives of these structures, itsme supplies the speed drives and, where necessary, also the technical know-how. For projects where Sissing Noord needs this knowledge, specialist itsme offers “some relief”.
    Read more

Stay up to date with the latest news:

  • NEWS
    23.10.2024
    Siemens - Save on your machine thanks to the new SINAMICS S200
    The latest S200 Sinamics servo system from Siemens features a good balance between functionality, design and cost. The system comprises the S200 controller, 1FL2 servo motor and associated cables for power supply, encoder and holding brake in lengths of up to 30 metres.
    Read more
  • NEWS
    09.09.2024
    Siemens - SIRIUS 3SK
    For years, Siemens has been making it easy to implement local safety applications quickly and efficiently - with SIRIUS 3SK. The 3SK safety relays offer maximum functionality while saving space in the control cabinet.
    Read more
  • NEWS
    05.09.2024
    Siemens - The pole position team
    Step on the accelerator and win! Join the race with the SITOP PSU6200 power supply and experience how the matching SEL1200 selectivity module can put you in pole position.
    Read more
  • NEWS
    12.06.2024
    Siemens - HMI Unified Basic Panels
    Siemens introduces the HMI Unified Basic Panels, a new standard in machine visualisation. Designed to meet the diverse requirements in a production process, these panels provide operators with a better overview and control of machines, production lines and entire plants.
    Read more

Why not take a look at these trainings we offer: