G-serie servomotor 200 W met cirkelvormige connector, incrementele encoder, 3000 t/min., 230 VAC, met houdrem

AC-motor 400 V 3-f, 1,30 kW (8,34 Nm nominaal, 23,3 Nm piek) 20-bits IncEnc, DustS

G5-serie HI servomotor 1,5 kW, nominaal koppel 7,16 Nm, piekkoppel 21,5 Nm, incrementele encoder, 2000 t/min., 400 VAC, met houdrem

G5-serie HI servomotor 1,0 kW, nominaal koppel 4,77 Nm, piekkoppel 14,3 Nm, incrementele encoder, 2000 t/min., 400 VAC

Mechatronics, Servo, Sigma5, SGMEV-15DDA6C

Drive-integral safety card for the servo amplifier series PMCprotego D implementable safety level: SIL 3 in accordance with EN/IEC 62061 supported safety functions: STO, SS1, SS2, SOS, SLS, SSR, SDI, SBC, SBT, SLI, SLP CLees verder

Mo = 0,95Nm Io = 2,02A UN = 400V nN = 3000min-1 Jmot = 0,376 kgcm2 Encoder ECI 1118 EnDat2.2 singleturn, with brake,

Technical data at 3 x 400 V AC: Continuous output current: 12 A, Imax (5 s) = 24 A, Power consumption in S1 mode: 9 kVA Integral brake resistor Further hardware options: Expansion card PMCprotego S2.

Mo = 66.1 Nm Io = 37.9 A UN = 400 V nN = 2000 min-1 Jmot = 133 kgcm2 Encoder ECI 1118 EnDat2.2 single-turn, without brake.

Mo = 4.4 Nm Io = 5.80 A UN = 400 V nN = 6000 min-1 Jmot = 2.90 kgcm2 Encoder ECI 1118 EnDat2.2 single-turn, without brake.

Mo = 0,95Nm Io = 2,02A UN = 400V nN = 6000min-1 Jmot = 0,19 kgcm2 Encoder EQN 1135 EnDat2.2 multiturn, without brake,

Technical data at 3 x 400 V AC: Continuous output current: 72 A, Imax (5 s) = 140 A, Power consumption in S1 mode: 50 kVA required accessories: Brake resistor 10 Ohm. Further hardware options: Expansion card PMCprotego SLees verder

Mo = 28.0 Nm Io = 20.0 A UN = 400 V nN = 3000 min-1 Jmot = 27.28 kgcm2 Encoder ECI 1118 EnDat2.2 single-turn, with brake, separate ventilation.

Mo = 23.4 Nm Io = 14.7 A UN = 400 V nN = 3000 min-1 Jmot = 13.9 kgcm2 Encoder EQN 1135 EnDat2.2 multi-turn, without brake, separate ventilation.

Technical data at 3 x 400 V AC: Continuous output current: 1.5 A, Imax (2 s) = 4.5 A, Imax (5 s) = 3.0 A, Power consumption in S1 mode: 1.1 kVA Integral brake resistor Further hardware options: Expansion card PMCprotego Lees verder

Technical data at 3 x 400 V AC: Continuous output current: 6 A, Imax (2 s) = 18 A, Imax (5 s) = 12 A, Power consumption in S1 mode: 4.5 kVA Integral brake resistor Further hardware options: Expansion card PMCprotego S1.

Base device with increased peak output current Technical data at 3 x 400 V AC: Continuous output current: 24 A, Imax (2 s) = 72 A, Imax (5 s) = 48 A, Power consumption in S1 mode: 18 kVA Integral brake resistor Further hLees verder

Mo = 20.8 Nm Io = 14.0 A UN = 400 V nN = 3000 min-1 Jmot = 21.6 kgcm2 Encoder ECI 1118 EnDat2.2 single-turn, without brake.

Mo = 2.8 Nm Io = 5.36 A UN = 400 V nN = 6000 min-1 Jmot = 0.93 kgcm2 Encoder EQN 1135 EnDat2.2 multi-turn, without brake.

G-serie compacte servomotor 200 W met cirkelvormige connector, nominaal koppel 0,64 Nm, piekkoppel 1,78 Nm, absolute encoder, 3000 t/min., 230 VAC, met houdrem

R88E geïntegreerde servomotor 1,35 kW, nominaal koppel 4,3 Nm, piekkoppel 22 Nm, incrementele encoder, 3000 t/min., 560 VDC, met houdrem, as met spie

R88E geïntegreerde servomotor 7,85 kW, nominaal koppel 25 Nm, piekkoppel 70 Nm, absolute multiturn encoder, 3000 t/min., 560 VDC, met houdrem

R88E geïntegreerde servomotor 1,35 kW, nominaal koppel 4,3 Nm, piekkoppel 22 Nm, incrementele encoder, 3000 t/min., 560 VDC, met houdrem

R88E geïntegreerde servomotor 1,35 kW, nominaal koppel 4,3 Nm, piekkoppel 22 Nm, incrementele encoder, 3000 t/min., 560 VDC, as met spie

R88E geïntegreerde servomotor 3,67 kW, nominaal koppel 11,7 Nm, piekkoppel 45 Nm, incrementele encoder, 3000 t/min., 560 VDC