Cable for PMCprotego and motor with connector design Assembled on both sides with connector () round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 Lees verder

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation).

with brake; Feedback system Resolver 2-pole; Mo = 12.00 Nm Io = 7.40 AUN = 400 V nN = 3000 min-1 Jmot = 26.90 kgcm2.

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector () Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

with brake; Feedback system Resolver 2-pole; Mo = 8.00 Nm Io = 4.90 AUN = 400 V nN = 3000 min-1 Jmot = 13.60 kgcm2.

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: IEC 61131-3 programmingTechnical data at 3 x 400 V AC: Continuous output current: 3 A, Imax(2 s)= 9 A Imax (5 Lees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: Dynamic curvecalculation Technical data at 3 x 400 V AC: Continuous output current:12 A, Imax (5 s)= 24 A, powLees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen, PROFIBUS Software option: IEC 61131-3programming, dynamic curve calculation Technical data at 3 x 400 V AC:Continuous output cLees verder

Included extension board PMCprimo CBussystems standard: CANopen / ProfibusSoftware option: dynamic curve calculation IEC 61131-3 -programming Path interpolationyyadditional hardware option: Card PMCprotego S1-2yyTechnicaLees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: IEC 61131-3 programming,dynamic curve calculation Technical data at 3 x 400 V AC: Continuousoutput current: 1.Lees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: IEC 61131-3 programmingTechnical data at 3 x 400 V AC: Continuous output current: 48 A, Imax(5 s)= 96 A, powerLees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen, PROFIBUS Software option: IEC 61131-3programming, dynamic curve calculation Technical data at 3 x 400 V AC:Continuous output cLees verder

Included extension board PMCprimo CBussystems standard: CANopenSoftware option: IEC61131-3 programming Path interpolationyyTechnical Detailsat 3 x 400 V AC supply voltage:Permanent output current: 1,5 A;Imax (2 sec.) = 4Lees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: none Technical data at 3x 400 V AC: Continuous output current: 12 A, Imax (5 s)= 24 A, powerconsumption in S1 Lees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen Software option: IEC 61131-3 programmingTechnical data at 3 x 400 V AC: Continuous output current: 12 A, Imax(5 s)= 24 A, powerLees verder

Included extension board PMCprimo CBussystems standard: CANopen / ProfibusSoftware option: IEC61131-3 programmingyyTechnical Detailsat 3 x 400 V AC supply voltage:Permanent output current: 1,5 A;Imax (2 sec.) = 4,5 A; ImLees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen, PROFIBUS Software option: IEC 61131-3programming Technical data at 3 x 400 V AC: Continuous output current:12 A, Imax (2 s)= 3Lees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen, PROFIBUS Technical data at 3 x 400 V AC:Continuous output current: 3 A, Imax (2 s)= 9 A Imax (5 s)= 6 A, powerconsumption in SLees verder

Drive-based motion control system With expansion card PMCprimo CStandard bus system: CANopen, PROFIBUS Software option: none Technicaldata at 3 x 400 V AC: Continuous output current: 6 A, Imax (2 s)= 18 AImax (5 s)= 12 ALees verder